Schluter®-VINPRO-T
Perfil para revestimientos elásticos para transiciones a la misma altura- para renovaciones
- ¡NUEVO! Ahora disponible en 1"" (25mm)
- Evita el astillamiento en los revestimientos flexibles.
- Ideal para instalaciones de suelos en las que las baldosas están rodeadas de madera, laminado u otros revestimientos duros.
- Diseñado para transiciones de pisos en renovaciones
- Disponible en aluminio anodizado en tres colores de acabado
Encuentre aquí los accesorios recomendados
Estimador de perfiles
Descubra lo que necesita para proteger las baldosas y facilitar las transiciones.
Schluter-VINPRO-T is designed to provide transitions between existing same-height, resilient floor coverings, in new and retrofit applications (e.g. LVT). VINPRO-T is installed within the joint cavity and overlaps adjoining surface materials, thus preventing edges from becoming damaged when subjected to mechanical stress.
Schluter resilient surface covering profiles require no special maintenance or care and are resistant to mold and fungi. Clean profiles using neutral cleaning agents. For anodized aluminum, do not use abrasive or strong alkaline cleaning agents.
1. To ensure proper support of the lateral crosspiece, ensure the joint width is less than 1/2" (12.5 mm) or 1" (25 mm).
2. The joint cavity must be at least 1/8" (3mm) deep and free of debris. Substances that inhibit adhesion must be removed from the sides of the joint.
3. Fill the joint with elastomeric sealant such as Schluter-KERDI-FIX or similar. Insert the vertical leg of VINPRO-T in the joint so that lateral crosspiece rests completely on the edges of the surface covering.
4. Remove any excess sealant with suitable cleaner.
FAQ
Are screws included with the VINPRO profiles?
Is a leveling patch required to feather out the anchoring leg to prevent telegraphing through to the top surface of the vinyl flooring?
What finishes are the VINPRO profiles available in?
The VINPRO profiles are available in brushed chrome (ACGB), brushed nickel (ATGB), and brushed antique bronze (ABGB) ...
Leer másHow can I choose the best profile height for my resilient covering?
We recommend choosing the profile height that is up to a 0.5 mm greater than the coverings thickness ...
Leer más
Ver y aprender
Acerca del producto
Schluter®-VINPRO: Profiles for resilient floor and wall coverings
Encuentre tutoriales y videos de documentación de proyectos para aprender cómo sacar mejor provecho de nuestros productos, ¡empiece ahora y diviértase!
Ver más vídeos / listas de reproducción
