Schluter®-KERDI-BOARD-SNLT
Nicho de ducha con iluminación LED LIPROTEC
- Impermeable al agua y al vapor
- Caja de conexión de cables estanca integrada
- Cumple con los códigos NEC y CEC
- El kit incluye la tira de luz LED LIPROTEC y el perfil
- Disponible tanto para instalación horizontal como vertical
- Nichos horizontales disponibles en 2 tamaños y nichos verticales en 3 tamaños, ofreciendo opciones de instalación versátiles
- El kit de nicho incluye un marco impermeable KERDI-BAND para sellar las juntas, así como tornillos y arandelas para fijar KERDI BOARD-SNLT a la estructura de montantes
Encuentre aquí los accesorios recomendados
Estimador para los sistemas de ducha
Haga una estimación de todo lo que necesita para su proyecto de ducha.
Estimador KERDI-BOARD
Calcule sus paneles de construcción para una instalación impermeable rápida y sencilla.
Schluter®-KERDI-BOARD-SNLT is a prefabricated shower niche made of KERDI-BOARD that incorporates a mounting profile with a diffused LED light strip. It features a pre-installed waterproof connection box to ensure the electrical connection is code-compliant. The KERDI-BOARD-SNLT niche can be installed in both KERDI and KERDI-BOARD wall assemblies. The shower niche features a 1/2" (12.5 mm) thick by 2" (50 mm) wide integrated bonding flange and is available in various sizes, with options for vertical or horizontal installation.
The mounting profile is made of anodized aluminum with satin finish (AE). It is sized to fit along the top of the niche and features a cut out designed to pass the cable. The LED light strip is encased in a silicone tube that provides an evenly diffused line of warm white light measuring 3000K and nests into the mounting profile.
Each niche kit niche includes:
- A stainless steel connection box and cover which are inserted into the waterproofed and factory-assembled plastic connection box, ensuring a code-compliant LED system.
- A self-adhesive patch used for proper thin-set mortar adhesion and to prevent mortar from entering the connection box. The patch is not intended for waterproofing.
- A KERDI-BAND frame used to waterproof the connection between the niche and the surrounding walls.
- KERDI-BOARD-ZS/-ZT screws and washers used to fasten the niche to the wall framing.
LIPROTEC LEDs and components require no special maintenance or care and are resistant to mold and fungi. Clean profiles periodically using pH neutral cleaning agents. All cleaning agents must be free of hydrochloric acid, hydrofluoric acid, and chlorides. Oxidation films on aluminum may be removed with a conventional polishing agent, but the film will form again. In the case of anodized aluminum, do not use abrasive cleaning agents.
The LIPROTEC LED strips are designed for easy cleaning.
The LIPROTEC LED strip can be easily replaced.
Ready to install your Schluter®-KERDI-BOARD-SNLT niche? Check out the step-by-step installation instructions or view our comprehensive installation video below.
This product must be installed by a qualified person in accordance with the KERDI-BOARD-SNLT installation instructions and with the Canadian Electrical Code Part I (Canada) or the National Electrical Code (U.S.) as applicable. All electric connections must be made by a qualified person, according to the electrical and building codes effective in your region.
Garantías
FAQ
What are the components I need to properly install my KERDI-BOARD-SNLT niche?
Once the LIPROTEC LED is installed into the mounting profile, how do you get it out safely if needed?
The LED can be removed from the mounting profile, and you can test its operation without fully installing directly into place. Removal of the LED can be...
Leer másDo we need to use all three LIPROTEC components? Can I use another driver, LED, or wire?
The LIPROTEC system is specifically designed to work together and is UL listed as a system. The cable and gland seal the wire outlet hole. The LED connectors are...
Leer másAre the components of the LIPROTEC system replaceable?
Yes. The LED can easily be replaced by removing it from the mounting profile. NEC/CEC requires the drivers to be accessible, so they can also be...
Leer másCan KERDI-BOARD-SNLT be installed in a steam shower?
DO NOT install the KERDI-BOARD-SNLT in a commercial, continuous-use steam room or shower. For residential, intermittent-use steam shower applications, please contact...
Leer másWhat if I lose the self adhesive patch for my KERDI-BOARD-SNLT niche?
A piece of Schluter®-KERDI-BAND can be cut to 3-3/16" x 4-3/4"-6" (88 x 120-150 mm) and substituted. Use a Schluter® thin-set mortar or Schluter®-KERDI-FIX to hold in place...
Leer másWhat should I do if I'm having difficulty inserting the LIPROTEC LED into the mounting profile or above the tiles at the ends?
The mounting profile and end areas must be free of any debris, grout or thin-set. Review all areas for obstructions. Remove with a pick or scraping tool before...
Leer másWhy isn't my LIPROTEC LED lighting up or is flickering?
Incorrect or poor wiring connection. The polarity of low voltage V+ (RED) and V-(Black) are reversed OR the circuit breaker is off or tripped. Recheck all connections.
Leer másWhat is included in my KERDI-BOARD-SNLT kit?
The niche kit includes: Prefabricated shower niche made of KERDI-BOARD with pre-installed waterproof connection box for a code-compliant installation...
Leer másThe LED is sticky from dirt or thin-set/grout dust and is difficult to insert to the profile.
Clean the LED with soapy water. This same solution can be done using a spray bottle to help lubricate the interface between...
Leer másWhy is there a lump in the middle of the KERDI-BOARD-SNLT LED, causing it not to sit flat?
The wire above the LED may not be properly inserted into the connection box or could be lying between the LED and the...
Leer másCan KERDI-BOARD-SNLT be installed in a steam shower?
KERDI-BOARD-SNLT is approved for installation in residential, intermittent-use steam shower...
Leer másEvaluations and Listings
UL2108 (US), CSA-C22.2 No. 250.2 (Canada) - Low-voltage Lighting Systems, Power Units, Luminaires and Fittings, E530823 - Certified for the US & Canada LED Strips Suitable for Wet Locations - IP 67 Rating
Ver y aprender
Acerca del producto
How to install the new Schluter®-KERDI-BOARD-SNLT with LIPROTEC Lighting
See your shower in a whole new light with Schluter®-KERDI-BOARD-SNLT with LIPROTEC Lighting!
Encuentre tutoriales y videos de documentación de proyectos para aprender cómo sacar mejor provecho de nuestros productos, ¡empiece ahora y diviértase!
Ver más vídeos / listas de reproducción
