Schluter®-DILEX-BTS

Perfil de junta de dilatación de alta resistencia con centro telescópico- para renovaciones

Schluter® DILEX-BTS es un perfil de junta de dilatación de alta resistencia que hace de puente de las juntas de dilatación y posibilita los movimientos por medio de una sección telescópica central de 1- 3/16" (30 mm) de ancho, la que constituye también la superficie visible.
  • Diseñado para permitir el movimiento y reducir las tensiones en superficies revestidas de grandes dimensiones
  • Elimina la necesidad de sellado
  • Previene las roturas y el astillamiento de las baldosas
  • Especialmente diseñado para renovaciones
  • No necesita mantenimiento.
  • Adecuado para su uso en almacenes, instalaciones de producción, centros comerciales, aeropuertos, estaciones de tren y garajes, etc.
  • También puede utilizarse en revestimientos limpiados con máquinas
  • Disponible en aluminio anodizado satinado
 ...read more  ...show less

Tipo de producto

Select all options to find the
specific product you want to buy.

Find recommended accessories here

Schluter®-DILEX-BTS is a heavy-duty expansion joint profile that bridges expansion joints and accommodates movement via the 1-3/16” (30 mm)-wide telescopic center section, which also forms the visible surface.

Schluter-DILEX-BTS requires no special maintenance or care and is resistant to mold and fungi. Clean profile using common household cleaning agents. In the case of anodized aluminum, do not use abrasive cleaning agents.

DILEX-BTS can be inserted into existing joint spaces. The joints must be at least 1-3/4" (44 mm) wide and 3/8" (10 mm) deep. The lateral anchoring legs are adhered to the existing covering with a suitable adhesive (e.g., epoxy resin) or mechanically fastened to the covering with the appropriate screws.

Data sheets

Movement Joints Data Sheet
3.92 MB
Pdf

Product Table

MovementJoint_Profiles
2.34 MB
Pdf

Warranties

Schluter-Systems Movement Joints and Cove-shaped Profiles 5-Year Limited Warranty
210.53 KB
Pdf

Brochures and Pamphlets

Profiles Usage Sheet
47.27 KB
Pdf
Q:

How do I cut profiles?

A:

Schluter™ profiles are available in a variety of different materials , so methods for cutting vary. Below are best practices for cutting according...

Read more

CAD drawings

schlueter_cad_dilex_bts_metr
8.41 KB
Pdf
schlueter_cad_dilex_bts_inst
38.25 KB
DWG
schlueter_cad_dilex_bts_inst
14.06 KB
Pdf
schlueter_cad_dilex_bts_imp
45.71 KB
DWG
schlueter_cad_dilex_bts_metr
40.96 KB
DWG
schlueter_cad_dilex_bts_imp
8.56 KB
Pdf

Spec. Guides

Product Spec Guide 2019
1.25 MB
Pdf

Specify our products using the

Specification Logo
Player

Watch & Learn
About the product

Introduction to Schluter® Profiles

Introduction to Schluter® Profiles

03:35
Tips on How to Choose Your Profile Size in Relation to Your Tile

Tips on How to Choose Your Profile Size in Relation to Your Tile

02:50
Tips on Cutting Profiles

Tips on Cutting Profiles

07:00

Find some existing tutorials and project documentation videos to learn how-to get the best out of our products - for more fun in your life, start now!

Watch more videos / playlists

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-BT

Movement Joint Profiles / Inside Corner Movement Joints

Schluter®-DILEX-BTO

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-STF

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-EDP

Movement Joint Profiles / Surface & Expansion Joints

Schluter®-DILEX-KSN